The First Victory AAR

My pair of Yaks in lower left corner.

I hosted (and played) The First Victory scenario from the Check Your 6! Korean War scenario book this past weekend for the group. Alas, it was another one of those times in which I did not remember to take many pictures, but I can cobble together a bit of an after action report this go-around.

We had three North Korean players with a pair of Yak-9s each, facing off against three players flying a pair of F-80s (high cover) and three Twin Mustangs. The Yaks had a mission to get their aircraft of the edge of the board, although the scenario seems to be a bit confused on which edge and even with how the setup was described (Board Edges 1 and 2 do NOT intersect so one cannot set up their planes within ten hexes of that intersection), but we managed. The Yaks and Mustangs were pretty much on the deck, and with visibility only sixteen hexes it took a few turns for spotting range to be achieved. I made the players fly level and use only forward turn codes until a spotting check was passed. Then the fun began.

Denying Mustangs their due while the F-80s are in a futile chase.

We had four Korean Yaks line abreast (with a hex in between each) with my pair lying support a few hexes behind. One pair went for the deck with the goal of getting off the victory point edge while the other two players mixed it up with the Shooting Stars (once they came down to play) and Twin Mustangs. With mostly green crews on the board, shots were not easy to come by, but one F-82 shot down a Yak, evening the numbers. However, while the F-80s turned to chase the pair of Yaks screaming for the board edge, a series of maneuvers meant that the remaining Yaks were now engaged and unable to really break away. I placed my pair of Yaks with a couple of pretty good tail shots, but of course missed both. At that I had a chance to break for the victory point board edge as well, while the other engaged Yak finally meant his demise. The Shooting Stars could not get the first pair of Yaks, so some VPs were heading our way. I was able to slip around a few turns, knocking down a Shooting Star while giving the Twin Mustangs mostly deflection shots. On one turn the remaining F-80 decided to do a zero speed move in hopes of getting me in a shooting aspect, but a broke hard and the next turn that pilot failed his crew check. Being at Surface Low TAL 1, he crashed into the ground. I am counting that as a maneuver kill!

The end is nigh.

But now the F-82s were circling and one of my Yaks exposed its tail. BOOM! Down goes Frazier! A turn later my other Yak took an engine hit. We played about sixteen turns, and had some successful aircrew survival roles. Using the VP chart in the scenario book, the ending tally was:

Americans - 9 VPs

North Koreans - 8 VPs

Planes - Flight Deck Decals

Decals - a mix of Dom's, Flight Deck, and Sieben Schwaben Spiele.

Paints - all Vallejo except the red which is Army Painter Pure Red. NATO Black on the F-82s, aluminium on the F-80s, and Azure Blue on the Yaks.

Korean War Planes Ready for the Table

A productive few days on the assembly line as I worked on finishing some planes I have had in various stages for a few months. These additions will allow me to game 24 out of 52 scenarios I have for the Korean War. 

F-80s - Vallejo Aluminium, Foundry Bavarian Cornflower Blue Shade 73C, Vallejo NATO Black, Army Painter Pure Red, Dom's Decals (national insignia), Flight Deck Decals (USAF). I will be adding some additional decals from Sieben Schwaben, such as plane numbers and some additional details.

Yak-9s - Vallejo UK Azure Blue, Foundry Bavarian Cornflower Blue Shade 73C, Army Painter Pure Red, Vallejo Natural Steel, Sieben Schwaben Spiele Decals.

F-82s - Vallejo NATO Black, Foundry Bavarian Cornflower Blue Shade 73C, Army Painter Pure Red, Vallejo Natural Steel, Dom's Decals (national insignia), Flight Deck Decals (USAF). While I used Vallejo Decal Softener there are still some cloudy parts on the decals. I've not had that issue before, and a second coat helped a bit, but did not solve the issue completely. I am thinking the black background is really bringing this defect to the fore.

Being colder outside, I cannot spray the planes with varnish (Army Painter Satin) on our balcony so I went with a brush coat of Vallejo Satin Acrylic Varnish. That provides a good protective layer while giving the planes just a hint of shine. For the F-82s, I went with a coat of Vallejo Gloss with a coat of satin as these night fighters had quite the sheen.

Plenty of more planes in the paint and decal queue, so more will be forthcoming.

More P-40s Off the Line

I have completed the very basic scheme I am using for a pair of scenarios (Darwin A Flight and B Flight - found on the downloads page) I am hosting at CincyCon in March. These represent the 33rd Pursuit Squadron over Darwin. The planes are a bit of a compromise as some illustrations show "U. S. Army" on the undersides, while others do not. Same is true with the type of roundel used but most sources indicate the red ball and white star was used, although the red ball had been reduced in size with white paint applied in the field - I was not about to try that in 1/285 scale decals!

Additionally there should be some small plane numbers added to the tail and in some cases the front portion of the fuselage, in either black or yellow. I've not been able to source two digit numbers small enough to use. Lastly, some of the pilots had individual markings on their P-40s, but again, decals for those in 1/285 are lacking.

Keeping the scheme simple however allows a variety of early war uses - along with Darwin they could be used over Pearl Harbor or the Philippines. They will also get use as the 9th Pursuit Squadron for another action near Darwin as the 9th's planes initially had the red ball/white star national insignia.

Paints:

Vallejo - Neutral Gray (71.051), NATO Black (71.251), N 41 Dark Olive Drab (71.316), Natural Steel (70.864)

Foundry - Bavarian Cornflower Blue Light (73C)

Decals:

Flight Deck Decals

Varnish:

Army Painter Satin

Heinkel Completion

Ready for the table, my hack job on the never used in combat but a really damn cool plane: the Heinkel He 100D!

A schwarm of Table Top Flights Heinkels are painted and decals applied. I am happy with the end result for the most part - the color choices worked well for the schwarzgrun and the hellblau, but the Vallejo dunkelgrun seems a bit off (the planes are slightly less dark in person). The Army Painter Satin sheen is a bit much, so I will hit the planes with some matt varnish. The decals are all Scale Specialties, sourced from I-94, and intended for early war Bf 109s, but they did the trick rather well on the Heinkels, although adding the swastika on the tail was a pain in the arse as there as not a lot of room to work with.

I have two additional Heinkels that are nearly completed, but one has a bent wing to straighten out, while the other has a less than smooth engine cover from the original print. But all they need is to have the badge insignia added, a bit of decal softener, then a coat of varnish, and then my Heinkel He 100 project is complete. Oh wait, I need opposing aircraft as well! UPDATE (11/4/25) - I completed the last pair of Heinkels - the wife's hairdryer did the trick on the warped wing.

I now have created two scenarios to use with the Heinkels, the latest being "Propaganda Jager" which can now be found on the Downloads page that features some French planes my gaming buddy Matt has. Look for some after action reports in the future.

Baltic Encounter - Planes Completed

The bad guys - East German MiG-15 and MiG-17

This post was an effort to push me to take care of the chore of adding decals to planes that were mostly painted and just awaiting those final touches that bring a miniature to life. Applying decals is not what I call an enjoyable task, and I think it is mostly from a time perspective that I dally when it comes to this stage of completing planes for the table top. I have my system worked out fairly well - put a little gloss finish where the decals will be applied (this makes it easier to move the decal into proper position), apply Vallejo decal fix, cut the decal, soak in hot water while holding a non-printed corner with tweezers, and after about twenty to thirty seconds of soaking slide the decal into place with a brush end (although sometimes I forego the gloss and even the decal fix as I have also had good luck in not using either). If needed I roll a Q-Tip over the decal to absorb the excess water while pushing out any bubbles, and adjust the decal so that it is perfectly placed. Once the decal is dry, I brush on Vallejo decal softener which "melts" the decal so as to conform to ribbing or panel lines. To complete the process, and the plane, I spray with satin finish from Army Painter.

In this particular case I used Flight Deck Decals for the Swedish and East German national insignia and Dom's Decals for the Americans (I had a sheet I picked up in a trade for some Korean War planes years back). The blue letters on the J 29s and the red numbers on the MiGs are from I-94 as part of their Beacon range. Flight Deck's decals come as one complete decal sheet and one needs to carefully trim around the desired decal, while Dom and Beacon decals are easier to deal with since the decal is just the printed portion. Flight Deck and Dom's take a little longer to soak and loosen, while the Beacon decals are usually ready to slide off in ten seconds. 

Free world nations' FJ-4 and J 29

The blue letters came out a little light and are not very noticeable, but the red numbers on the MiGs certainly catch the eye. Overall I am fairly happy with the outcome. There are some issues on the national insignia decals on the bottom of one J 29, caused I think by too much decal fix, and even the coat of satin finish didn't really correct the haziness around the decal, but luckily it is on the bottom and really not noticeable. 

These planes are now ready for the tabletop, and to be used for my Baltic Encounter scenario found on the Downloads page.

The Completed Ponnier

This nice little bird is completed! Added another coat of yellow to the rudder stripe, added the remaining decals, and applied a coat of matte varnish. The decals (made by I-94) were sent by a fellow gamer (thanks again, Keith). Alas, they were a bit aged, so some tore during the process, so I went with Miscellaneous Miniatures decals. The sizes are pretty close to the illustration shown.

After several discussions with camelbeagle and other on the Wings of Glory forum, I've decided to go with the following stats:

V Deck, B Gun, 10 damage points, Climb Rate of 4. I have been unable to obtain a maximum altitude for the Ponnier.

Colors: Wing surfaces and wheel covers AK Interactive Clear Doped Linen version 2, tires Vallejo Medium Sea Grey, fuselage and propeller Vallejo Cork Brown, Lewis gun and motor Vallejo Natural Steel, rudder flash Vallejo Black, Vallejo Carmine Red, and Army Painter Babe Blonde, struts Vallejo Flat Brown.

I cannot wait to get this little plane on the table.

Mat - GripMats